Initializing cgroup subsys cpu Linux version 3.4.4 (root@rat) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #18 SMP PREEMPT Sat Jul 7 09:58:15 CEST 2012 Command line: libahci.ignore_sss=1 root=/dev/sda1 rootfstype=ext4 video=1600x900 quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) BIOS-e820: 0000000020200000 - 0000000040000000 (usable) BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) BIOS-e820: 0000000040200000 - 00000000ba884000 (usable) BIOS-e820: 00000000ba884000 - 00000000ba9ea000 (reserved) BIOS-e820: 00000000ba9ea000 - 00000000bac0c000 (usable) BIOS-e820: 00000000bac0c000 - 00000000bad96000 (reserved) BIOS-e820: 00000000bad96000 - 00000000bad97000 (usable) BIOS-e820: 00000000bad97000 - 00000000bade8000 (reserved) BIOS-e820: 00000000bade8000 - 00000000bae34000 (usable) BIOS-e820: 00000000bae34000 - 00000000bafe8000 (ACPI NVS) BIOS-e820: 00000000bafe8000 - 00000000baffd000 (usable) BIOS-e820: 00000000baffd000 - 00000000bb000000 (ACPI data) BIOS-e820: 00000000bb000000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013f800000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. DMI: ASUSTeK Computer Inc. UX31E/UX31E, BIOS UX31E.212 03/12/2012 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x13f800 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0BC000000 mask FFC000000 uncachable 3 base 0BB000000 mask FFF000000 uncachable 4 base 100000000 mask FC0000000 write-back 5 base 13F800000 mask FFF800000 uncachable 6 base 0FFC00000 mask FFFC00000 write-protect 7 disabled 8 disabled 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbaffd max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000fcbc0] fcbc0 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000099000] 99000 size 20480 init_memory_mapping: 0000000000000000-00000000baffd000 0000000000 - 00bae00000 page 2M 00bae00000 - 00baffd000 page 4k kernel direct mapping tables up to baffd000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-000000013f800000 0100000000 - 013f800000 page 2M kernel direct mapping tables up to 13f800000 @ baff7000-baffd000 ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_) ACPI: XSDT 00000000baffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013) ACPI: FACP 00000000baf9ad98 000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120320/tbfadt-378) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBAFE4E40/0x00000000BAFE4D40, using 32 (20120320/tbfadt-502) ACPI: DSDT 00000000baf87018 122F0 (v01 _ASUS_ Notebook 00000000 INTL 20091112) ACPI: FACS 00000000bafe4e40 00040 ACPI: APIC 00000000baffdf18 000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013) ACPI: DBGP 00000000baffff18 00034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013) ACPI: ECDT 00000000bafe4b18 000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003) ACPI: SLIC 00000000baf9be18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001) ACPI: HPET 00000000bafe5d18 00038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003) ACPI: MCFG 00000000bafe5c98 0003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097) ACPI: SSDT 00000000baf86018 0084D (v01 PmRef Cpu0Ist 00003000 INTL 20091112) ACPI: SSDT 00000000baf85018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112) ACPI: DMAR 00000000baf9ac18 000E0 (v01 INTEL SNB 00000001 INTL 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0013f800 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x00020000 0: 0x00020200 -> 0x00040000 0: 0x00040200 -> 0x000ba884 0: 0x000ba9ea -> 0x000bac0c 0: 0x000bad96 -> 0x000bad97 0: 0x000bade8 -> 0x000bae34 0: 0x000bafe8 -> 0x000baffd 0: 0x00100000 -> 0x0013f800 On node 0 totalpages: 1023638 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3913 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 743240 pages, LIFO batch:31 Normal zone: 4064 pages used for memmap Normal zone: 256032 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 16 CPUs, 12 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013f400000 s72704 r8192 d21504 u131072 pcpu-alloc: s72704 r8192 d21504 u131072 alloc=1*2097152 pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1003185 Kernel command line: libahci.ignore_sss=1 root=/dev/sda1 rootfstype=ext4 video=1600x900 quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Memory: 3944652k/5234688k available (6642k kernel code, 1140136k absent, 149900k reserved, 2630k data, 508k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 Preemptible hierarchical RCU implementation. Dump stacks of tasks blocking RCU-preempt GP. NR_IRQS:4352 nr_irqs:808 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1696.186 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.37 BogoMIPS (lpj=1696186) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) mce: CPU supports 7 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20120320 DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a DMAR: DRHD base: 0x000000fed91000 flags: 0x1 IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a DMAR: RMRR base: 0x000000badcc000 end: 0x000000bade4fff DMAR: RMRR base: 0x000000bbe00000 end: 0x000000bfffffff Switched APIC routing to physical flat. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5-2557M CPU @ 1.70GHz stepping 07 Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. PEBS disabled due to CPU errata. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Booting Node 0, Processors #1 #2 #3 Brought up 4 CPUs Total of 4 processors activated (13569.48 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbae34000-0xbafe7fff] (1785856 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000badca798 0073F (v01 PmRef Cpu0Cst 00003001 INTL 20091112) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0073F (v01 PmRef Cpu0Cst 00003001 INTL 20091112) ACPI: SSDT 00000000badcba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112) ACPI: SSDT 00000000badc9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 pci 0000:00:02.0: reg 10: [mem 0xddc00000-0xddffffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 pci 0000:00:16.0: reg 10: [mem 0xdfe09000-0xdfe0900f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0xdfe00000-0xdfe03fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 pci 0000:00:1d.0: reg 10: [mem 0xdfe07000-0xdfe073ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:1c4d] type 00 class 0x060100 pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f] pci 0000:00:1f.2: reg 24: [mem 0xdfe06000-0xdfe067ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 10: [mem 0xdfe05000-0xdfe050ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdfdfffff] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd1ffffff 64bit pref] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000 pci 0000:02:00.0: reg 10: [mem 0xdea00000-0xdea7ffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xdea80000-0xdea8ffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.1: bridge window [mem 0xdea00000-0xdf3fffff] pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref] pci 0000:03:00.0: [1b73:1009] type 00 class 0x0c0330 pci 0000:03:00.0: reg 10: [mem 0xde000000-0xde00ffff 64bit] pci 0000:03:00.0: reg 18: [mem 0xde011000-0xde011fff 64bit] pci 0000:03:00.0: reg 20: [mem 0xde010000-0xde010fff 64bit] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] pci 0000:00:1c.3: bridge window [mem 0xde000000-0xde9fffff] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd09fffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux video capture interface: v2.00 wmi: Mapper loaded Advanced Linux Sound Architecture Driver Version 1.0.25. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009e800 - 000000000009ffff reserve RAM buffer: 00000000ba884000 - 00000000bbffffff reserve RAM buffer: 00000000bac0c000 - 00000000bbffffff reserve RAM buffer: 00000000bad97000 - 00000000bbffffff reserve RAM buffer: 00000000bae34000 - 00000000bbffffff reserve RAM buffer: 00000000baffd000 - 00000000bbffffff reserve RAM buffer: 000000013f800000 - 000000013fffffff Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-3e] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xc0000000-0xfeafffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xff000000-0xffffffff] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x004e-0x004f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x0680-0x069f] pnp 00:05: [io 0x1000-0x100f] pnp 00:05: [io 0xffff] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0400-0x0453] pnp 00:05: [io 0x0458-0x047f] pnp 00:05: [io 0x0500-0x057f] pnp 00:05: [io 0x164e-0x164f] system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x1000-0x100f] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x0453] has been reserved system 00:05: [io 0x0458-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x0070-0x0077] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0454-0x0457] system 00:07: [io 0x0454-0x0457] has been reserved system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:08: [io 0x0240-0x0259] system 00:08: [io 0x0240-0x0259] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs ETD0105 PNP0f13 PNP0f03 PNP0f12 PNP0f0b PNP0f0e (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] pnp 00:0b: [mem 0xfed10000-0xfed17fff] pnp 00:0b: [mem 0xfed18000-0xfed18fff] pnp 00:0b: [mem 0xfed19000-0xfed19fff] pnp 00:0b: [mem 0xe0000000-0xe3ffffff] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] pnp 00:0b: [mem 0xfed90000-0xfed93fff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] pnp 00:0b: [mem 0xff000000-0xffffffff] pnp 00:0b: [mem 0xfee00000-0xfeefffff] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0xd2000000-0xd2000fff] system 00:0c: [mem 0xd2000000-0xd2000fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0x20000000-0x201fffff] pnp 00:0d: [mem 0x40000000-0x401fffff] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved system 00:0d: [mem 0x40000000-0x401fffff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdfdfffff] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd1ffffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.1: bridge window [mem 0xdea00000-0xdf3fffff] pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 03-03] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] pci 0000:00:1c.3: bridge window [mem 0xde000000-0xde9fffff] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xd09fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xdf400000-0xdfdfffff] pci_bus 0000:01: resource 2 [mem 0xd1600000-0xd1ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xdea00000-0xdf3fffff] pci_bus 0000:02: resource 2 [mem 0xd0b00000-0xd14fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] pci_bus 0000:03: resource 1 [mem 0xde000000-0xde9fffff] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device pci 0000:00:1d.0: broken D3 during system sleep on ASUS pci 0000:00:1d.0: EHCI: BIOS handoff PCI: CLS 64 bytes, default 64 DMAR: No ATSR found IOMMU 0 0xfed90000: using Queued invalidation IOMMU 1 0xfed91000: using Queued invalidation IOMMU: Setting RMRR: IOMMU: Setting identity map for device 0000:00:02.0 [0xbbe00000 - 0xbfffffff] IOMMU: Setting identity map for device 0000:00:1d.0 [0xbadcc000 - 0xbade4fff] IOMMU: Prepare 0-16MiB unity mapping for LPC IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a microcode: Microcode Update Driver: v2.00 , Peter Oruba audit: initializing netlink socket (disabled) type=2000 audit(1341648012.278:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7833 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt pci 0000:02:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt pci 0000:03:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x21120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC0] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: Requesting acpi_cpufreq thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (63 C) ioatdma: Intel(R) QuickData Technology Driver 4.00 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 65536K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using getrawmonotonic(). [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: setting latency timer to 64 ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery present) i915 0000:00:02.0: irq 45 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Refined TSC clocksource calibration: 1696.146 MHz. Switching to clocksource tsc [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 200x56 fb0: inteldrmfb frame buffer device drm: registered panic notifier ACPI Warning: _BQC returned an invalid level (20120320/video-472) acpi device:33: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 brd: module loaded loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 46 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xdfe06000 port 0xdfe06100 irq 46 ata2: DUMMY ata3: DUMMY ata4: DUMMY ata5: DUMMY ata6: DUMMY tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky ath: EEPROM regdomain: 0x60 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x60 ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90014f00000, irq=17 usbcore: registered new interface driver ath9k_htc usbcore: registered new interface driver asix ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1d.0: support lpm ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: supports USB remote wakeup ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdfe07000 ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.4.4 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.0 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub uhci_hcd: USB Universal Host Controller Interface driver xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:03:00.0: supports USB remote wakeup xhci_hcd 0000:03:00.0: irq 19, io mem 0xde000000 xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 3.4.4 xhci_hcd usb usb2: SerialNumber: 0000:03:00.0 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub usb usb2: adding 2-0:1.0 (config #1, interface 0) hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: Single TT hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:03:00.0: supports USB remote wakeup usb usb3: skipped 1 descriptor after endpoint usb usb3: default language 0x0409 usb usb3: udev 1, busnum 3, minor = 256 usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: xHCI Host Controller usb usb3: Manufacturer: Linux 3.4.4 xhci_hcd usb usb3: SerialNumber: 0000:03:00.0 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub usb usb3: adding 3-0:1.0 (config #1, interface 0) hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 3-0:1.0: power on to power good time: 20ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver ums-realtek i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs i2c /dev entries driver ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251) ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 usbcore: registered new interface driver btusb usbcore: registered new interface driver ath3k cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver mei 0000:00:16.0: setting latency timer to 64 mei 0000:00:16.0: irq 52 for MSI/MSI-X asus_wmi: ASUS WMI generic driver loaded asus_wmi: Initialization: 0x1 asus_wmi: BIOS WMI version: 7.6 asus_wmi: SFUN value: 0xa0877 input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 1: status 0501 change 0001 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s asus_wmi: Backlight controlled by ACPI video driver snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ATA-9: SanDisk SSD U100 128GB, 10.01.02, max UDMA/133 ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SanDisk SSD U100 10.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: new high-speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 ehci_hcd 0000:00:1d.0: LPM: no device attached usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports detected hub 1-1:1.0: standalone hub hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: power on to power good time: 100ms hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports hub 1-1:1.0: port 5: status 0101 change 0001 hub 1-1:1.0: port 7: status 0101 change 0001 hub 1-1:1.0: port 8: status 0101 change 0001 usb 1-1: link qh256-0001/ffff880139133e00 start 1 [1/0 us] hub 1-1:1.0: state 7 ports 8 chg 01a0 evt 0000 hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 5 not reset yet, waiting 10ms usb 1-1.5: new high-speed USB device number 3 using ehci_hcd hub 1-1:1.0: port 5 not reset yet, waiting 10ms input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 8021q: 802.1Q VLAN Support v1.8 registered taskstats version 1 ALSA device list: #0: HDA Intel PCH at 0xdfe00000 irq 53 usb 1-1.5: skipped 1 descriptor after configuration usb 1-1.5: skipped 6 descriptors after interface usb 1-1.5: skipped 1 descriptor after endpoint usb 1-1.5: skipped 10 descriptors after interface usb 1-1.5: default language 0x0409 usb 1-1.5: udev 3, busnum 1, minor = 2 usb 1-1.5: New USB device found, idVendor=13d3, idProduct=5719 usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 1-1.5: Product: USB2.0 VGA Webcam usb 1-1.5: Manufacturer: Azurewave usb 1-1.5: SerialNumber: NULL usb 1-1.5: usb_probe_device usb 1-1.5: configuration #1 chosen from 1 choice usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0) usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1) hub 1-1:1.0: port 7, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 7 not reset yet, waiting 10ms psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f00) psmouse serio4: elantech: Synaptics capabilities query result 0x20, 0x15, 0x0e. usb 1-1.7: new high-speed USB device number 4 using ehci_hcd hub 1-1:1.0: port 7 not reset yet, waiting 10ms input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input9 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 508k freed usb 1-1.7: default language 0x0409 usb 1-1.7: udev 4, busnum 1, minor = 3 usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0139 usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.7: Product: USB2.0-CRW usb 1-1.7: Manufacturer: Generic usb 1-1.7: SerialNumber: 20100201396000000 usb 1-1.7: usb_probe_device usb 1-1.7: configuration #1 chosen from 1 choice usb 1-1.7: adding 1-1.7:1.0 (config #1, interface 0) hub 1-1:1.0: port 8, status 0101, change 0000, 12 Mb/s hub 1-1:1.0: port 8 not reset yet, waiting 10ms usb 1-1.8: new full-speed USB device number 5 using ehci_hcd hub 1-1:1.0: port 8 not reset yet, waiting 10ms usb 1-1.8: default language 0x0409 usb 1-1.8: udev 5, busnum 1, minor = 4 usb 1-1.8: New USB device found, idVendor=13d3, idProduct=3375 usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.8: Product: Bluetooth USB Host Controller usb 1-1.8: Manufacturer: Atheros Communications usb 1-1.8: SerialNumber: Alaska Day 2006 usb 1-1.8: usb_probe_device usb 1-1.8: configuration #1 chosen from 1 choice usb 1-1.8: adding 1-1.8:1.0 (config #1, interface 0) btusb 1-1.8:1.0: usb_probe_interface btusb 1-1.8:1.0: usb_probe_interface - got id usb 1-1.8: adding 1-1.8:1.1 (config #1, interface 1) hub 1-1:1.0: state 7 ports 8 chg 0000 evt 0100 usb 1-1.8: link qh1-0e01/ffff8801390be700 start 0 [1/2 us] udevd[1243]: starting version 171 uvcvideo 1-1.5:1.0: usb_probe_interface uvcvideo 1-1.5:1.0: usb_probe_interface - got id uvcvideo: Found UVC 1.00 device USB2.0 VGA Webcam (13d3:5719) input: USB2.0 VGA Webcam as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) usb 1-1.5: link qh4-0001/ffff880139133680 start 3 [1/0 us] usb 1-1.5: unlink qh4-0001/ffff880139133680 start 3 [1/0 us] hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend, wakeup 1 hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend, wakeup 1 EXT4-fs (sda1): re-mounted. Opts: discard usb 1-1.8: unlink qh1-0e01/ffff8801390be700 start 0 [1/2 us] usb 1-1: clear tt buffer port 8, a5 ep2 t04048d80 usb 1-1.5: usb auto-suspend, wakeup 0 ADDRCONF(NETDEV_UP): wlan0: link is not ready ehci_hcd 0000:00:1d.0: reused qh ffff8801390be700 schedule usb 1-1.8: link qh1-0e01/ffff8801390be700 start 0 [1/2 us] xhci_hcd 0000:03:00.0: hcd_pci_runtime_suspend: 0 usb 1-1.7: usb auto-suspend, wakeup 0 usb 1-1.8: unlink qh1-0e01/ffff8801390be700 start 0 [1/2 us] usb 1-1: clear tt buffer port 8, a5 ep2 t04048d80 usb 1-1.8: usb auto-suspend, wakeup 1 hub 1-1:1.0: hub_suspend usb 1-1: unlink qh256-0001/ffff880139133e00 start 1 [1/0 us] usb 1-1: usb auto-suspend, wakeup 1 EXT4-fs (sda1): re-mounted. Opts: discard,commit=0 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend, wakeup 1 ehci_hcd 0000:00:1d.0: suspend root hub ehci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0